PDR stands for paintless dent repair. It’s a craft that you can learn and it will, once you have mastered the skill, be a way for you to earn a very nice income. You will be able to remove those dings from car doors, and other small dents that you will find around the automobile. This doesn’t take long if you are experienced at doing it. It normally takes 10 to 20 minutes and is very inexpensive, since there is no product to buy. PDR is becoming the alternative to body shops in Boulder .
The biggest reason people are choosing this method over a body shop is the time that it takes at a body shop to repair a dent, and also the money they are spending to get it fixed. With PDR, not only will the time your vehicle is being repaired be shorter, but also it will cost you so much less money. It’s a new way of fixing dents and dings that is putting the car repair world at notice!
How exactly does paintless dent repair work? A person who has been trained at PDR will use metal rods and picks in order to massage out dents and dings from the finish of the car. This will be done by the expert working from the inside of the car or panel, depending on where the dent or ding is. In essence, the dings and dents are being pushed out. A normal repair from beginning to end will last about 10 to 20 minutes.
If you want to try and do this as a living all you need is to purchase the tools, get the training, and offer a service where you will go to people and fix the dents and dings, or get a shop and do the service from there. This is a very high-demand service in Boulder that many people are looking to have done now. It depends on where the dent or ding is in the vehicle and how you will access it. Here are some of the more common areas and how to go about accessing it.
Doors: You will need to roll down the window, and access the area by the window ledge opening. There may be an existing opening in the door jam. Access through this spot. Take the panel off the door, or even drill a hole in the door. You can finish this off by putting a silicone plug into the hole to prevent any corrosion, and to make the door look good.
Rear quarter panels: There should be an opening or even a vent in the rear door area. Access through this spot. Go through the trunk, or through a tail light assembly. You can access the dent through the wheel well, or drill a hole through the rear door. Of course, you will need to plug it when finished.
Roof: simply remove or lower the headliner.
Front fender: go through the engine compartment, or through a headlight assembly. Again you could access this from the inner wheel well too.
Hood: remove the covering from the inside of the hood and access the ding or dent this way.
While doing these repairs, it should not require the technician to drill any holes.
A Quick Guide to Paintless Dent Repair
If you are a vehicle owner, you have most probably heard of paintless dent repair. It is one of the most widely used techniques for fixing dents and similar types of damage to the car's body. Here you will find useful information about this repair method to help you get a clear idea of when it works best and when to use it.
What is it?
This is a technique used for flattening the dents on the body of a moving vehicle, and more specifically, on the panels. Special metal rods and picks are used to get behind the shell. Then the technician manipulates them to push out the dent. This is how the surface becomes flat once again. One interesting fact about paintless dent repair is that it's been around for over eight decades.
Is it effective for all dents?
The straightforward answer is: no, it isn't, but it's worth looking at the details. As its name suggests, this type of repair technique works only when the paint of the car is intact. If it is damaged, a different method must be used. It is typically more complex and time-consuming. Additionally, when the paint is damaged, time is of the essence for getting the panel restored fully. The good news is that the paint used by modern vehicle manufacturers is highly resistant to cracking, peeling and other types of damage.
Paintless dent repair is most effective for minor dents and creases, hail damage and dings. It would typically work well even if there are multiple dents or creases close together. A close professional inspection of the vehicle's damage is the best way to determine if this technique should be used or not.
Does it matter what material the panel is made from?
This repair method is regarded to be effective and safe for both steel and aluminum panels. It is not known to cause any changes to the structure of these metals that would make them weaker or more susceptible to rust and other types of damage. It is worth noting that with this technique, the paint of the vehicle will remain intact too, provided that it is applied correctly, of course.
Can I do the job it myself?
Theoretically, you can. The tools needed for paintless dent repair are readily available and don't cost a small fortune to buy. There are also plenty of online videos showing you how to apply the technique correctly. Still, if you don't have sufficient knowledge and skill, you risk causing further damage to your vehicle. That is why DIY repair is not a very good idea.
How do I choose a professional paintless dent repair service?
Confirm that the technician who will do the job has received specialized training and has sufficient experience. Ask about the warranty provided before hiring the service. Leading providers usually cover their work with a lifetime warranty. In general, you should know that this type of repair job doesn't take a long time to complete so you should expect to get your vehicle fully fixed in days rather than weeks, unless there is a waiting list.
It happens to the best of us. You know that dent or ding that you notice as you're washing your car. You think to yourself "where did that come from?" Then you shake your head in disappointment. This happens to one in three people. So, what can you do about it?
You first need to take action in preventing the dents from happening in the first place or happening again. What you should try to do is try parking your car farther out or in an area where fewer cars are parked to avoid getting the dents or dings. There are people out there who haphazardly swing their doors open, not to mention the amount of kids who do that too. Also making sure not to park near a cart return spot can reduce your chances of such incidents. Shopping carts are a common culprit in denting cars! Parking a little farther would also provide you the chance to get a little exercise in your daily routine. It is a win-win step to preventing dents!
So now you may be wondering why you should even bother fixing those little dents on your car. For some people self image or self reflection of their car will be a reason to fix minor dents and dings. They feel that their car is a reflection of them and they want it to look its best and make a good impression. Some people will want to fix it solely because they wanted to preserve the value of their car. Another huge reason is that it takes away from the value of your car. When and if you decide to sell or trade in your car that will be a factor in how much you get for your car! Either reason is perfectly sound. The reality is that even though most people want to fix or repair their car they think it will cost too much money and also may take too much time. So what is a solution to this problem?
The best solution is PDR or Paintless Dent Removal. Paintless Dent Removal is a process in which tools, rods and reflective light sources are used to remove dings and dents. This is a very effective process if your paint has not been cracked. The dent is carefully and craftily massaged out from the inside. Dents--from the size of a dime to 2 or 3 inches in diameter and larger--disappear in a span of five to 15 minutes. In many cases, there is no evidence a dent ever existed. This is a great option since no bonding agent or paint is needed. It can often be difficult and time consuming to match paint colors. Also it will save you money since fewer supplies are involved in the process. The best thing about Paintless Dent Removal is that it does not take away of the value your car. Also keep in mind that Paintless Dent Removal can be completed in a short time. So you will not be very long with out your vehicle. This is a great option for anyone no matter what your reason may be for fixing the dents on your car!