Centennial Auto Dent Removal

PDR stands for paintless dent repair. It’s a craft that you can learn and it will, once you have mastered the skill, be a way for you to earn a very nice income. You will be able to remove those dings from car doors, and other small dents that you will find around the automobile. This doesn’t take long if you are experienced at doing it. It normally takes 10 to 20 minutes and is very inexpensive, since there is no product to buy. PDR is becoming the alternative to body shops in Centennial .

Paintless Dent Repair Process

The biggest reason people are choosing this method over a body shop is the time that it takes at a body shop to repair a dent, and also the money they are spending to get it fixed. With PDR, not only will the time your vehicle is being repaired be shorter, but also it will cost you so much less money. It’s a new way of fixing dents and dings that is putting the car repair world at notice!

Paintless dent repair crease

How exactly does paintless dent repair work? A person who has been trained at PDR will use metal rods and picks in order to massage out dents and dings from the finish of the car. This will be done by the expert working from the inside of the car or panel, depending on where the dent or ding is. In essence, the dings and dents are being pushed out. A normal repair from beginning to end will last about 10 to 20 minutes.

Dent Repair Cost

If you want to try and do this as a living all you need is to purchase the tools, get the training, and offer a service where you will go to people and fix the dents and dings, or get a shop and do the service from there. This is a very high-demand service in Centennial  that many people are looking to have done now. It depends on where the dent or ding is in the vehicle and how you will access it. Here are some of the more common areas and how to go about accessing it.

Auto Dent Repair

Doors: You will need to roll down the window, and access the area by the window ledge opening. There may be an existing opening in the door jam. Access through this spot. Take the panel off the door, or even drill a hole in the door. You can finish this off by putting a silicone plug into the hole to prevent any corrosion, and to make the door look good.

Rear quarter panels: There should be an opening or even a vent in the rear door area. Access through this spot. Go through the trunk, or through a tail light assembly. You can access the dent through the wheel well, or drill a hole through the rear door. Of course, you will need to plug it when finished.

Paintless Dent Repair Training

Roof: simply remove or lower the headliner.

Front fender: go through the engine compartment, or through a headlight assembly. Again you could access this from the inner wheel well too.

Hood: remove the covering from the inside of the hood and access the ding or dent this way.

While doing these repairs, it should not require the technician to drill any holes.

Paintless dent repair light

Centennial

Paintless Dent Repair - The Truth, Myths and Misconceptions

Paintless dent removing is increasingly becoming popular day by day as it is not only a time saving technique, but is also cost effective and efficient. These techniques are the best solution for minor dents and actually result in your car looking brand new. Even a trained eye will not be able to detect where the dented area was.

One of the most common reasons why PDR is used is to repair hail damage, minor body creases, door dings and minor bumper indentions. This technique can also be used to help prepare the damaged panel for paint repair. In such cases it is referred to as push-to-paint or push-for-paint. One of the limiting factors that ails PDR is that it cannot be used for paint repair and the amount of metal that can be stretched by the incurred damage. And so many times sharp dents and creases may not be repairable at least not without a paint job.

In the recent years there has been a conscious effort to bring a standard to this trade and even The National Alliance of Paintless Dent Repair Technicians (NAPDRT) was formed in 2006. The mission of this organization is to educate consumers and to enhance the industry standards through third party certification and mutual accountability. To date however there is no industry wide certification process in the field of Paintless Dent Repairs.

Methods of Repair:
One of the most common methods of paintless dent repair is to utilise body picks and metal rods to push the dent out from the inner side of the panel that is being repaired. Also glue might be used from the exterior of the panel in order to pull the dents out. In either of the cases fine tuning of these repairs requires "tapping" down the repair in order to remove the small high spots so as to make the surface flat. PDR may use both steel and aluminum panels.

Fluorescent lighting or in some cases even light reflection boards are used to see the shadows that are created by the deformation of the dent. This is an extremely important aspect of the repair process as without the paintless dent repair light or the reflector board the fine detail of the process is unseen and the technician then cannot choose their tool specifically and repair the damage effectively.

The process of paintless dent repair needs the technician to specifically push the metal in the exact location to a precise height which can be seen or witnessed with a PDR reading instrument such as the PDR reflector board or the PDR light.

This trade needs some special PDR training which can be availed at a number of schools Australia wide. But if you are interested in the best then head down to Dents R Us. For more info please visit http://www.dentsrus.com.au.

Pop a Dent

It happens to the best of us. You know that dent or ding that you notice as you're washing your car. You think to yourself "where did that come from?" Then you shake your head in disappointment. This happens to one in three people. So, what can you do about it?

You first need to take action in preventing the dents from happening in the first place or happening again. What you should try to do is try parking your car farther out or in an area where fewer cars are parked to avoid getting the dents or dings. There are people out there who haphazardly swing their doors open, not to mention the amount of kids who do that too. Also making sure not to park near a cart return spot can reduce your chances of such incidents. Shopping carts are a common culprit in denting cars! Parking a little farther would also provide you the chance to get a little exercise in your daily routine. It is a win-win step to preventing dents!

So now you may be wondering why you should even bother fixing those little dents on your car. For some people self image or self reflection of their car will be a reason to fix minor dents and dings. They feel that their car is a reflection of them and they want it to look its best and make a good impression. Some people will want to fix it solely because they wanted to preserve the value of their car. Another huge reason is that it takes away from the value of your car. When and if you decide to sell or trade in your car that will be a factor in how much you get for your car! Either reason is perfectly sound. The reality is that even though most people want to fix or repair their car they think it will cost too much money and also may take too much time. So what is a solution to this problem?

The best solution is PDR or Paintless Dent Removal. Paintless Dent Removal is a process in which tools, rods and reflective light sources are used to remove dings and dents. This is a very effective process if your paint has not been cracked. The dent is carefully and craftily massaged out from the inside. Dents--from the size of a dime to 2 or 3 inches in diameter and larger--disappear in a span of five to 15 minutes. In many cases, there is no evidence a dent ever existed. This is a great option since no bonding agent or paint is needed. It can often be difficult and time consuming to match paint colors. Also it will save you money since fewer supplies are involved in the process. The best thing about Paintless Dent Removal is that it does not take away of the value your car. Also keep in mind that Paintless Dent Removal can be completed in a short time. So you will not be very long with out your vehicle. This is a great option for anyone no matter what your reason may be for fixing the dents on your car!

Centennial  

A Quick Guide to Paintless Dent Repair

Pop a Dent

COLORADO Paintless dent repair light