PDR stands for paintless dent repair. It’s a craft that you can learn and it will, once you have mastered the skill, be a way for you to earn a very nice income. You will be able to remove those dings from car doors, and other small dents that you will find around the automobile. This doesn’t take long if you are experienced at doing it. It normally takes 10 to 20 minutes and is very inexpensive, since there is no product to buy. PDR is becoming the alternative to body shops in Oklahoma .
The biggest reason people are choosing this method over a body shop is the time that it takes at a body shop to repair a dent, and also the money they are spending to get it fixed. With PDR, not only will the time your vehicle is being repaired be shorter, but also it will cost you so much less money. It’s a new way of fixing dents and dings that is putting the car repair world at notice!
How exactly does paintless dent repair work? A person who has been trained at PDR will use metal rods and picks in order to massage out dents and dings from the finish of the car. This will be done by the expert working from the inside of the car or panel, depending on where the dent or ding is. In essence, the dings and dents are being pushed out. A normal repair from beginning to end will last about 10 to 20 minutes.
If you want to try and do this as a living all you need is to purchase the tools, get the training, and offer a service where you will go to people and fix the dents and dings, or get a shop and do the service from there. This is a very high-demand service in Oklahoma that many people are looking to have done now. It depends on where the dent or ding is in the vehicle and how you will access it. Here are some of the more common areas and how to go about accessing it.
Doors: You will need to roll down the window, and access the area by the window ledge opening. There may be an existing opening in the door jam. Access through this spot. Take the panel off the door, or even drill a hole in the door. You can finish this off by putting a silicone plug into the hole to prevent any corrosion, and to make the door look good.
Rear quarter panels: There should be an opening or even a vent in the rear door area. Access through this spot. Go through the trunk, or through a tail light assembly. You can access the dent through the wheel well, or drill a hole through the rear door. Of course, you will need to plug it when finished.
Roof: simply remove or lower the headliner.
Front fender: go through the engine compartment, or through a headlight assembly. Again you could access this from the inner wheel well too.
Hood: remove the covering from the inside of the hood and access the ding or dent this way.
While doing these repairs, it should not require the technician to drill any holes.
What Is Paintless Dent Removal?
It can be frightening when you get stuck in a hail storm but the truly scary part is what it can do to your car. You wouldn't think that little chunks of ice could do much damage to sheet metal. However, many people have been left with a car that looks like a golf ball after a nasty winter storm. Auto Hail Damage Repair has changed a lot over the years and can be done in some cases without the need for a new paint job.
For years the standard way to remove dents was by pulling the dent out. You would have to drill holes into the dented area and use a tool to pull the metal back into shape. Then you would have to grind the holes down and use a body filler to smooth them over. After that you would repaint the damaged area and that is one of the biggest drawbacks to this procedure. A paint job that was put on by the manufacturer is of extremely high quality. It is nearly impossible to duplicate it without taking it back to the manufacturer. So you would be left with a section of car that was obviously repainted with inferior materials.
Paintless Dent Repair was invented specifically for this reason. The Mercedes-Benz Company in Germany was having a lot of trouble shipping their cars to the various dealers. When they arrived they would have dents and dings but the car lot would not have the resources to give them a manufacturer quality paint job after they were repaired. So they developed a procedure for Paintless Dent Removal that uses rods to push the dent out from the inside while gently tapping the outside with a hammer. It is important that the technician be very skilled using Paintless Dent Repair techniques because if they strike the metal too hard it will split. Sometimes glue is used on the outside of the car to pull the dent instead of pushing with rods which can eliminate the need for using a hammer on the metal. The only times that Paintless Dent Removal is not possible is if the paint was damaged by the initial impact or if the metal has been stretched too far out of shape.
Paintless Dent Repair is a great way to save money and retain your original manufacturer paint job. Just make sure that the repair shop that you choose is reputable and has done it many times before. To find a local repair shop you can search the internet for Paintless Dent Repair North Georgia.
It happens to the best of us. You know that dent or ding that you notice as you're washing your car. You think to yourself "where did that come from?" Then you shake your head in disappointment. This happens to one in three people. So, what can you do about it?
You first need to take action in preventing the dents from happening in the first place or happening again. What you should try to do is try parking your car farther out or in an area where fewer cars are parked to avoid getting the dents or dings. There are people out there who haphazardly swing their doors open, not to mention the amount of kids who do that too. Also making sure not to park near a cart return spot can reduce your chances of such incidents. Shopping carts are a common culprit in denting cars! Parking a little farther would also provide you the chance to get a little exercise in your daily routine. It is a win-win step to preventing dents!
So now you may be wondering why you should even bother fixing those little dents on your car. For some people self image or self reflection of their car will be a reason to fix minor dents and dings. They feel that their car is a reflection of them and they want it to look its best and make a good impression. Some people will want to fix it solely because they wanted to preserve the value of their car. Another huge reason is that it takes away from the value of your car. When and if you decide to sell or trade in your car that will be a factor in how much you get for your car! Either reason is perfectly sound. The reality is that even though most people want to fix or repair their car they think it will cost too much money and also may take too much time. So what is a solution to this problem?
The best solution is PDR or Paintless Dent Removal. Paintless Dent Removal is a process in which tools, rods and reflective light sources are used to remove dings and dents. This is a very effective process if your paint has not been cracked. The dent is carefully and craftily massaged out from the inside. Dents--from the size of a dime to 2 or 3 inches in diameter and larger--disappear in a span of five to 15 minutes. In many cases, there is no evidence a dent ever existed. This is a great option since no bonding agent or paint is needed. It can often be difficult and time consuming to match paint colors. Also it will save you money since fewer supplies are involved in the process. The best thing about Paintless Dent Removal is that it does not take away of the value your car. Also keep in mind that Paintless Dent Removal can be completed in a short time. So you will not be very long with out your vehicle. This is a great option for anyone no matter what your reason may be for fixing the dents on your car!